PhysicsBilology
 

Plasticware

 
Animal Cage
Available in two different sizes, these Cages provide excellent shelter for different animal species in the laboratory. The metallic top provides proper ventilation and has provisions for feeding the species.
Material :Polyethylene / Stainless Steel

 
Catalogue No. Type Packing
PGW130/01 290 x 220 x 140 mm 1pcs
PGW130/02 430 x 270 x 150 mm 1pcs
PGW130/03 Water Bottle- 125 ml 12pcs
PGW130/04 Water Bottle- 250 ml 12pcs
 
 

 
Animal Cage (Twin Grill)
Adding in line with the existing range, these Animal Cages are provided with a Stainless Steel grill at the bottom of the cage to provide a clean surface for the species to move on.
Material: Polyethylene / Stainless Steel
 
Catalogue No. Type Packing
PGW131/01 290 x 220 x 140 1pcs
PGW131/02 430 x 270 x 150 1pcs
 

 
Kipp's Apparatus
Starlab Kipp's Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphate in the base of the Apparatus. Hydrogen Sulphide gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating Poly Tetra Flouro Ethylene (PTFE) plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Material :High Density Polyethylene
 
Catalogue No. Capacity ml Packing
PGW136/01 250 1pcs
PGW136/02 500 1pcs
PGW136/03 1000 1pcs
 

 
Beakers
Starlabware Beakers, moulded in Polypropylene, have execellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solutions becomes very convenient because of its tapered spout.
Material : Polypropylene
 
Catalogue No. Capacity ml Least Count Packing
PGW101/01 50 5 12pcs
PGW101/02 100 5 12pcs
PGW101/03 250 10 12pcs
PGW101/04 500 10 12pcs
PGW101/05 1000 25 6pcs
PGW101/06 2000 250 6pcs
 

 
Beakers (Euro Design)
Material : Polypropylene
 
Catalogue No. Capacity ml Least Count Packing
PGW102/01 25 5 12pcs
PGW102/02 50 5 12pcs
PGW102/03 100 5 12pcs
PGW102/04 250 10 12pcs
PGW102/05 500 10 12pcs
PGW102/06 1000 20 6pcs
PGW102/07 2000 50 6pcs
PGW102/08 5000 200 2pcs
Material : TPX
Catalogue No. Capacity ml Least Count Packing
PGW103/01 50 5 12pcs
PGW103/02 100 5 12pcs
PGW103/03 250 10 12pcs
PGW103/04 500 10 12pcs
PGW103/05 1000 20 6pcs
 

 
Dropping Bottles
Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly.
Material :Low Density Polyethylene
 
Catalogue No. Capacity ml Packing
PGW106/01 60 12pcs
PGW106/02 125 12pcs
 

 
Reagent Bottles (Narrow Mouth)
These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene
 
Catalogue No. Cap ml
PGW107/01 60
PGW107/02 125
PGW107/03 250
PGW107/04 500
PGW107/05 1000
 

 
Reagent Bottles (Narrow Mouth)
These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap hasa built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene
 
Catalogue No. Pieces
PGW108/01 12
PGW108/02 12
PGW108/03 12
PGW108/04 12
PGW108/05 6
 

 
Reagent Bottles (Wide Mouth)
These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylee Cap has a built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene
 
Catalogue No. Cap ml
PGW109/01 60
PGW109/02 125
PGW109/03 250
PGW109/04 500
PGW109/05 1000
 

 
Reagent Bottles (Wide Mouth)
These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene
 
Catalogue No. Pieces
PGW110/01 12
PGW110/02 12
PGW110/03 12
PGW110/04 12
PGW110/05 6
 

 
Narrow Mouth Bottle
This autoclavable bottle, made of polypropylene, can be used for storing & transfering chemicals and other reagents safe & sound.
Material :Polyproplyne
 
Catalogue No. Capacity ml Packing
PGW111/01 400 1pcs
 

 
Wide Mouth Square Bottel
This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The buil in depressions on two sides provide excellent grip while holding this bottle.
Material :Polyproplyne
 
Catalogue No. Capacity ml Packing
PGW112/01 400 1pcs
 

 
Heavy Duty Vaccum Bottle
This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vaccum.
Material :Polyproplyne
 
Catalogue No. Capacity ml Packing
PGW113/01 200 1pcs
 

 
Carboy
Starlabware Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purposes.
Material :Polyproplyne
 
Catalogue No. Ltrs Packing
PGW114/01 10 1pcs
PGW114/02 20 1pcs
 

 
Carboy With Stopcock
Adding in line of Starlab Aspirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to teh body. These carboys. These carboys are in excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions
Material :Polyproplyne
 
Catalogue No. Ltrs Packing
PGW115/01 10 1pcs
PGW115/02 20 1pcs
 

 
Aspirator Bottles
Starlab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.
Material :Polypropylene
 
Catalogue No. Ltrs Packing
PGW116/01 5 1pcs
PGW116/02 10 1pcs
PGW116/03 20 1pcs
 

 
Wash Bottles
Starlab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by sueezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.
Material :Low Density Polyethylene
 
Catalogue No. Capacity ml Packing
PGW117/01 125 12
PGW117/02 250 12
PGW117/03 500 6
PGW117/04 1000 6
 

 
Wash Bottles (New Type)
These Bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable. The distinguishing feature that these bottles contains is the builtin delivery tube making it a one-piece Wash-Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Material :Low Density Polyethylene
 
Catalogue No. Capacity ml Packing
PGW118/01 250 12pcs
PGW118/02 500 12
PGW118/03 125 12
 

 
Wide Mouth Wash Bottles
These wash bottles made of polyethylene have wide mouth that enables easy fillings as well as cleaning. The unique feature of the cap is through the top closure and stem moulded in one piece.
Material :Low Density Polyethylene
 
Catalogue No. Capacity ml Packing
PGW119/01 500 12pcs
 
  Next >>
 
 
 
 
Home|About Us|  Products| Contact Us
© 2006-2021 by Rajesh Scientic works. All Rights Reserved.